Pla Wood Filament 3D Printer Wooden Plastic 1.75Mm 1Kg Nature Materials 10M 100G Sample

Wood Filament Introduction:

Wood Filament is one type of simulation filament, by mixing some wood like powder inside PLA.

OPY Wood Filament Main Features:

1. Wood color and wood powder inside.
2. Easy printing:
Good melt flow rate makes printing process very easy.
3. Wide range temperature from 190 ℃ ~220 ℃:
Suitable for assorted 3D printer, Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D and etc.

OPY Wood Specification:

1. Material: Wood Filament
2. Color: Wood
3. Filament Diameter: 1.75mm
4. Tolerance: ±0.05mm
5. Print Temperature: 190~220℃
6. Infill Speed: 20-50mm/s
7. Heat-Bed Temperature: 50~100℃

OPY Wood Filament Printing Tips:

1. Nozzle size: suggest 0.6mm or bigger.
Reason: Real wood powder inside filament, it may clog small size nozzle.
2. Wood filament is brittle compare with pure PLA.
Reason: Real wood powder inside filament decrease break strength.
3. Keep wood filament dry before printing.
Reason: Wood PLA easy absorb air moisture.
Case: Show bubbles or strings when printing.
Solution: Dry in an oven at 55℃ for 3-6 hours.
Storage: Self-sealing bag with desiccant.
4. Heating bed is necessary to reduce warping.
Printing with sealed chamber will be better.
5. Effective ways to improve layer adhesion.
a) Stick Blue tape or Kapton tape on heat bed.
b) Cura: Build Plate Adhesion Type -> Raft.