Oxygen Sensor for Cadillac Escalade ESV EXT Chevrolet Avalanche GMC Sierra Yukon Lambda Upstream Downstream 234-4256 234-4668
Oxygen Sensor for Cadillac Escalade ESV EXT Chevrolet Avalanche GMC Sierra Yukon Lambda Upstream Downstream 234-4256 234-4668
SPECIFICATIONS
Brand Name: oukeione
Electronic: No
High-concerned chemical: none
Hysteresis: for 2008-2013 Chevrolet Avalanche Tahoe Suburban 5.3L
Linear: Oxygen Sensor (Not Air Fuel Ratio Sensor)
Material: others
Measuring Range: Upstream, Downstream, Sensor 1, Sensor 2
OEM NO.: 234-4256, 234-4668
Origin: Mainland China
Repeatability: for 2008-2012 GMC Sierra Yukon 1500 4.8L
Resolution: for 2009-2013 Cadillac Escalade ESV EXT 6.0L
Sensitivity: Upstream, Sensor 1, Front, Pre Cat.
Sensor Type: Piezoelectric
Type: Heating Type
Replaaces OEM Part Number:
Fit for:
2009-2013 Cadillac Escalade 6.0L
2009-2014 Cadillac Escalade 6.2L
2009-2013 Cadillac Escalade ESV 6.2L
2009-2013 Cadillac Escalade EXT 6.2L
2008-2013 Chevrolet Avalanche 5.3L
2008-2009 Chevrolet Avalanche 6.0L
2008-2012 Chevrolet Silverado 1500 4.8L
2008-2012 Chevrolet Silverado 1500 5.3L
2008-2012 Chevrolet Silverado 1500 6.0L
2009-2012 Chevrolet Silverado 1500 6.2L
2008-2012 Chevrolet Silverado 2500 HD 6.0L
2008-2011 Chevrolet Silverado 3500 HD 6.0L
2008-2013 Chevrolet Suburban 1500 5.3L
2008-2009 Chevrolet Suburban 1500 6.0L
2008-2011 2013 Chevrolet Suburban 2500 6.0L
2008-2009 Chevrolet Tahoe 4.8L
2008-2013 Chevrolet Tahoe 5.3L
2008-2013 Chevrolet Tahoe 6.0L
2008-2009 Chevrolet Tahoe 6.2L
2008-2012 GMC Sierra 1500 4.8L
2008-2012 GMC Sierra 1500 5.3L
2008-2012 GMC Sierra 1500 6.0L
2008-2012 GMC Sierra 1500 6.2L
2008-2011 GMC Sierra 2500 HD 6.0L
2008-2011 GMC Sierra 3500 HD 6.0L
2008-2009 GMC Yukon 4.8L
2008-2014 GMC Yukon 5.3L
2008-2013 GMC Yukon 6.0L
2009-2014 GMC Yukon 6.2L
2008-2014 GMC Yukon XL 1500 5.3L
2008-2009 GMC Yukon XL 1500 6.0L
2008-2014 GMC Yukon XL 1500 6.2L
2008-2013 GMC Yukon XL 2500 6.0L
Package include:
Note:
1. Please check OEM number before purchasing.
2. Please allow 1-2cm error due to manual measurement. Thanks for your
understanding.
3. Monitors are not calibrated same, item color displayed in photos may be
showing slightly different from the real object. Please take the real one as
standard.
Must Know Before Buying:
A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to
changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire
and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good
sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or
3 minutes.
Please take a video clip of the voltmeter and contact us if our sensor:
Goes above range between 0.1 and 0.9 volt
Remains below 0.5 volts
Stays fixed at a particular voltage
You're free to choose replacement or refund if our sensor fails to work, in this case.
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
