How to Use:

*1. Preparation: Clean the damaged alloy wheel with an alcohol cleaning pad, and remove rough edges and unevenness near the damaged area.

*2. Confirm the repair area. If it is slightly damaged, use wet sandpaper to trim the contour to the trimmed surface, and trim the paint surface with alloy silver.

*3. If the damaged area is large or has dents, use repair adhesive. Press the required repair adhesive onto the mat. Mix the two components together and provide a consistent gray material with a spatula. (Complete mixing within 2-4 minutes.)

*4. Repair: Fill the mixed adhesive to the overflow area of the damaged area and dry it for 15 minutes.

*5. To accommodate the contour: Use wet sandpaper to accommodate the contour on the repaired surface. If necessary, repeat steps 3 and 4.

*6. Paint: Clean the repair area and apply a thin layer of paint with a brush. The paint film should be placed at least 12 hours and fully cure for 3 days before using the car.

Features:

*1. Permanent repair.

*2. Easy to maintain.

*3. Withstand a high temperature of 130°C.

*4. Added value vibration and washability.

*5. The repair kit contains complete accessories that allow you to repair damage and scratches within 30 minutes.

*6. This repair kit can deal with curb damage, scratches, minor dents, installation damage, grinding marks and other damage to the wheel hub.

Package Includes:

1 x Repair Glue(6ml)

1 x Anti-Vibration Silver Gray Paint (5ml)

1 x Sandpaper

2 x Gloves

2 x Cotton Swab

2 x Brush

2 x Alcohol Cleaning Pad

2 x Plastic Spatula

1 x Manual